I'm getting a STOP 0x00...error Blue Screen of Death in my Windows XP computer/PC. How can I fix/repair or troubleshoot this blue screen?

I'm getting a STOP 0x00...error Blue Screen of Death inSTOP: 0x100000EA
my Windows XP computer. How can I fix/repair orTHREAD_STUCK_IN_DEVICE_DRIVER_M
troubleshoot this blue screen?This happens when the graphics adapter is caught in
Well in this technology advanced world - graphics andan infinite loop while it waits for the video hardware to
visual effects are manipulated with the help of bluebecome idle.
screen background, whether a weather channelBlue screen: INACCESSIBLE_BOOT_DEVICE
forecast news or graphics rich science fiction movie.This error often results from a boot device failure.
But you might be thinking why the hell your computerDuring I/O system initialization, the boot device driver
laptop screen has frozen with the blue screenmight have failed to initialize the boot device (typically a
displaying STOP followed by a series of zeroes andhard disk). File system initialization might have failed
upper cased ERROR message. What's wrong withbecause it did not recognize the data on the boot
your PC? It has been working well before and starteddevice. Also, repartitioning the system partition or
a down turn in performance lately and you've just gotinstalling a new SCSI adapter or disk controller might
this blue screen!!!!induce this error. This error can also result from
Blue screen IRQL_NOT_LESS_OR_EQUALincompatible disk hardware.
This error message is issued if paged memory (orBlue screen: KERNEL_DATA_INPAGE_ERROR
invalid memory) is accessed when the IRQL is tooThis stop message indicates that the requested page
high. The error that generates this bug check usuallyof kernel data from the paging file could not be read
occurs after the installation of a faulty device driver,into memory. This Stop message is usually caused by
system service, or BIOS.a bad block (sector) in a paging file, a virus, a disk
To resolve an error: Restart your computer, press F8controller error, or failing RAM. In rare cases, it is
at the character-mode menu that displays thecaused when nonpaged pool resources run out. It is
operating system choices. At the resultingalso caused by defective hardware.
Windows Advanced Options menu, choose the LastBlue screen:
Known Good Configuration option.PAGE_FAULT_IN_NONPAGED_AREAoccurs when
If this doesn't fix up your blue screen, then I wouldrequested data is not found in memory. The system
suggest using Reimage. With Reimage you can fix allgenerates a fault, which normally indicates that the
the blue screens, without a need to reformat/re-install.system looks for data in the paging file. In this
Reimage is an online PC repair solution that wouldcircumstance, however, the missing data is identified as
repair your system within 30 minutes. It is an all in onebeing located within an area of memory that cannot
combination of antivirus, antispyware, registry cleanerbe paged out to disk. The system faults, but cannot
and full PC repair.find, the data and is unable to recover.
- Reimage reinstalls the operating system withoutBlue screen: UNMOUNTABLE_BOOT_VOLUME
touching user data or applications.The file system is damaged and cannot be mounted.
- Reimage is the only product in the world that canBlue screen:
correct the damage a virus has caused (as opposedSESSION_HAS_VALID_POOL_ON_EXIT
to anti virus software that simply remove viruses butThis error is caused by a session driver not freeing its
don't correct that damage)pool allocations prior to a session unload. This indicates
- Reimage is the only technology in the world that cana bug in win32k.sys, atmfd.dll, rdpdd.dll, or a video driver.
fix your PC even after it is already damaged.STOP error 0x27 RDR_FILE_SYSTEM
Below are the list of descriptions to blue screenOne possible cause of this bug check is depletion of
error messages. Reimage can fix all your blue screensnonpaged pool memory. If the nonpaged pool memory
Blue screen: UNKNOWN_HARD_ERRORis completely depleted, this error can stop the system.
Stop 0xc0000218 error messageHowever, during the indexing process, if the amount of
Meaning that a necessary registry hive file could notavailable nonpaged pool memory is very low, another
be loaded. This error message can occur if the file iskernel-mode driver requiring nonpaged pool memory
corrupt or missing. Reimage will fetch a replacementcan also trigger this error.
from its web storage and fix it.Blue screen: IRQL_NOT_LESS_OR_EQUAL
Blue screen:Indicates that a kernel-mode process or driver
IONattempted to access a memory address to which it
Blue screen: BAD_POOL_CALLERdid not have permission to access. The most common
An invalid pool request has been made by the currentcause of this error is an incorrect or corrupted pointer
thread.that references an incorrect location in memory.
Blue screen: INVALID_KERNEL_HANDLEBlue screen: DATA_BUS_ERROR
A device driver likely has a bug.STOP 0x0000002E
Blue screen: CRITICAL_SERVICE_FAILEDThis stop message indicates that a parity error has
Bug Check 0x5A: CRITICAL_SERVICE_FAILEDbeen detected in system memory. This error is almost
A critical service failed to initialize while starting thealways caused by a hardware problem, so may not
LastKnownGood control set.be fixed using Reimage repair - but may be caused by
Blue screen: CRITICAL_OBJECT_TERMINATIONa faulty device driver attempting to access an address
This indicates that a process or thread Crucial toor a virus infected the Master Boot Record (MBR) -
system operation has unexpectedly exited or beenReimage can solve that!
terminated.May happen due to some corruptedBlue screen: NTFS_FILE_SYSTEM
system files.A problem occurred within NTFS.SYS, the driver file
Blue screen: DISORDERLY_SHUTDOWNthat allows the system to read and write to NTFS file
An application or device driver likely has a bug.system drives. There may be a physical problem with
Blue screen: BAD_SYSTEM_CONFIG_INFOthe disk, or an Interrupt Request Packet (IRP) may be
This error can occur if some critical registry keys andcorrupted. Other common causes include heavy hard
values are not present. Also error can occur if RAM isdrive fragmentation, heavy file I/O, problems with some
damaged .types of drive-mirroring software, or some antivirus
Blue screen:software.
DRIVER_IRQL_NOT_LESS_OR_EQUALCorrupted registry prevents Windows XP from
Often this is caused by a bad device driver that isstarting
using an improper address. Other possibilities are faultyError 0x80072EE2
or mistmatched ram or a corrupted pagefile.Error 0x80072EE7
Blue screen: VIDEO_DRIVER_INIT_FAILUREError 0x80072EFD
The system was not able to go into graphics modeError 0x80072F76
because no display drivers were able to start. ThisError 0x80072F78
usually occurs when no video miniport drivers are ableWindows Update client on the system was unable to
to load successfully.receive a response from the Windows Update or the
Blue screen: CRITICAL_SERVICE_FAILEDMicrosoft Update Web site. This situation is usually
A critical service failed to initialize while starting thecaused by redundant programs running on the
LastKnownGood control set. Probably a corruptedcomputer.
registry file.STOP 0x0000007B is prevents you from booting
Blue screen: MACHINE_CHECK_EXCEPTIONWindows in Safe Mode
Blue screen: KMODE_EXCEPTION_NOT_HANDLEDYou may receive a "Stop 0x0000007B" error
STOP 0x0000001emessage if your computer is infected with a
KMODE_EXCEPTION_NOT_HANDLED inboot-sector virus. Need to run Reimage repair from
win32k.systhe boot-CD. View Using Boot CD with Reimage
STOP 0xC000021A {Fatal System Error} Thevideo.
Windows Logon Process terminated unexpectedly.Reimage is a modern age PC repair solution that uses
This behavior can occur if you downloaded thea huge database or repository of over 25 million
Backdoor.NTHack virus from a remote host into yourcomponents of system files to compare to those
computer. This virus is initiated by the Dl.bat file in thewhich are missing or corrupt on your system. And on
InetPubScripts folder.a brief analysis it will make the necessary corrections
Blue screen: THREAD_STUCK_IN_DEVICE_DRIVERmaking your PC as good as a freshly installed one,
STOP 0x000000EAonly with all your files still there.
THREAD_STUCK_IN_DEVICE_DRIVER